The best band saws for resawing combine a tall cutting capacity, steady blade tracking, adequate motor power, and a rigid table. Choosing the right machine depends on both the size of your stock and the consistency you expect from each cut.
We selected 10 options ranging from compact benchtop saws for occasional woodworking to full-size machines built for wide boards, thick blanks, and frequent shop use.
Best 10 Band Saws for Resawing Picks for 2026
Best Overall Capacity
- 16-inch resaw capacity with an 18-inch throat
- Foot brake and toolless blade-guide adjustments
- Dual 4-inch dust ports for high-capacity collection
Best For: Large resaw work in home and small-production woodshops
Best Compact Premium Option
Laguna 14-Inch 1.75 HP Band Saw
- 13-inch resaw capacity in a 14-inch machine
- Ceramic guides and balanced cast-iron wheels
- 115/230V motor with quick-release tensioning
Best For: Precision-focused woodworking in a moderate-size shop
Best High-Power 230V Pick
- 3 HP motor with a 16-inch resaw capacity
- Large 20-by-27-inch precision-ground table
- Foot brake and dual 4-inch dust ports
Best For: Sustained heavy-duty resawing in a 230V-equipped shop
Best Two-Speed Value
RIKON 10-1414 14-Inch Band Saw
- 14-inch resaw capacity with a 13-5/8-inch cutting width
- Dual 1,476/3,280 feet-per-minute blade speeds
- Quick-adjust drift fence and tool-less blade guides
Best For: Flexible resawing and general woodworking projects
Versatile Resawing Workhorse
- Cuts up to 8.85 inches deep and 13-3/8 inches wide
- Two speeds from 1,480 to 3,280 FPM
- Includes stand, fence, work light, and dust port
Best For: High-capacity workshop resawing
Premium Precision Pick
Powermatic PWBS-14CS 14-Inch Bandsaw
- Includes 6-inch riser block and 4-inch resaw attachment
- Micro-adjustable blade guides above and below the table
- Cast iron wheels help reduce vibration
Best For: Precision-focused woodworking shops
Compact Budget Option
WEN BA3959 9-Inch Benchtop Band Saw
- 3-1/2-inch cutting depth and 9-inch cutting width
- Compact 40-pound benchtop design
- Includes fence, miter gauge, guard, and dust port
Best For: Small-shop and light-duty resawing
High-Capacity Pick
Laguna Tools 2.5HP 13-Inch Resaw Bandsaw
- 2.5hp motor runs on 220 volts
- Stated 12-inch resaw height
- Large 21-1/2 x 16-inch table
Best For: Demanding woodworking and tall-stock resawing
Compact Workshop Choice
SHOPMAX 4.2-Amp 10-Inch Benchtop Band Saw
- Cuts up to 4.5 inches deep
- 45-degree worktable adjustment
- Includes stand and dust connector
Best For: Smaller shops and moderate resawing tasks
Versatile Two-Speed Option
VEVOR 10-Inch Two-Speed Benchtop Bandsaw
- 6-inch stated cutting height
- 560 and 1100 rpm speed settings
- Includes stand, light, fence, and miter gauge
Best For: Adjustable hobby work across wood and other materials
Best Overall Capacity – JET 18-Inch 1.75 HP Band Saw
For demanding woodworking shops, the JET JWBS-18SFX is one of the most capable band saws for resawing. Its 16-inch resaw height, 18-inch throat, cast-iron table, and 1.75 HP motor provide substantial capacity for hardwood, softwood, and manufactured board.
Best For: Home and small-production woodshops that need high resaw capacity and strong work support.
Pros:
- 16-inch resaw capacity and 18-inch throat handle large stock.
- Foot brake provides fast, controlled stopping after shutdown.
- Toolless upper and lower blade-guide adjustments simplify setup.
- Dual 4-inch dust ports support connection to a 600 CFM or larger collector.
Cons:
- At 383 pounds, it requires substantial shop space and careful placement.
- A 20A circuit is recommended, and the blade is sold separately.
- Its 115V setup may be less convenient than a dedicated 230V machine for some shops.
This is a strong choice when resaw height, table stability, and stopping control matter more than compactness. The five-year warranty is another useful advantage for a long-term shop machine.
Best Compact Premium Option – Laguna 14-Inch 1.75 HP Band Saw
The Laguna MBAND1412-175 offers a useful balance of footprint and resawing performance. With a 13-inch resaw capacity, 1-3/4 HP dual-voltage motor, ceramic guides, and balanced cast-iron wheels, it is well suited to serious woodworking without moving up to an 18-inch machine.
Best For: Woodworkers who want precision-oriented features and 13-inch resaw capacity in a relatively compact 14-inch saw.
Pros:
- 13-inch resaw capacity supports larger boards and general woodworking.
- Ceramic guides and rack-and-pinion upper-guide adjustment help maintain blade control.
- Dual-voltage motor is pre-wired for 115V and can also run on 230V.
- Quick-release tension, tension indicator, and viewing windows aid setup and monitoring.
Cons:
- Its 13-inch capacity is lower than the 16-inch capacity of the larger JET models.
- The blade is sold separately.
- LTL freight delivery requires a valid phone number for scheduling.
Choose this Laguna when guide control and a manageable machine size are priorities. Its tilting cast-iron table and dual-voltage motor add flexibility, while the 13-inch opening covers many resawing projects.
Best High-Power 230V Pick – JET 18-Inch 3 HP Band Saw
For shops equipped for 230V power, this 3 HP JET is built for demanding band saw resawing. It combines a 16-inch resaw capacity with a 20-by-27-inch precision-ground cast-iron table, heavy-duty tensioning, and toolless ball-bearing guides.
Best For: High-demand woodworking shops that need maximum power from an 18-inch resawing machine.
Pros:
- 3 HP motor provides more power for large resawing workloads.
- 16-inch resaw capacity handles veneers, book-matched panels, and large stock.
- Large cast-iron table adds stability and work support.
- Foot brake, dual 4-inch dust ports, and quick-release tensioning improve shop usability.
Cons:
- Requires a 230V single-phase electrical setup.
- Its 406-pound weight and large footprint limit portability.
- The blade is sold separately.
This is the strongest fit of the group for sustained, demanding resaw work, provided the shop already supports 230V equipment. Its larger table and 3 HP motor make it especially appropriate for thick or wide stock.
Best Two-Speed Value – RIKON 10-1414 14-Inch Band Saw
The RIKON 10-1414 is a versatile option among band saws for resawing, combining a 14-inch resaw capacity with a dual-voltage 1-3/4 HP motor and two blade speeds. Its quick-adjust drift fence and tool-less guides are practical features for repeated woodworking setups.
Best For: Woodworkers who want flexible blade speeds, substantial resaw capacity, and convenient adjustment features.
Pros:
- 14-inch resaw capacity and 13-5/8-inch cutting width suit larger projects.
- 115/230V TEFC motor offers two speeds: 1,476 and 3,280 feet per minute.
- Quick-adjust drift fence includes micro-adjustment for setup control.
- Two dust ports, quick-release tension, and a storage cabinet add convenience.
Cons:
- Its 14-inch capacity is below the 16-inch capacity of the 18-inch JET models.
- It uses a smaller 111-inch blade than the larger machines in this group.
- The supplied details list a regular blade, so blade selection may still need attention for specialized resawing.
The RIKON is a well-rounded choice for users who value setup flexibility more than maximum throat size. Dual speeds and the adjustable drift fence make it adaptable across resawing and general band-saw work.
Versatile Resawing Workhorse – WEN BA1487 14-Inch Band Saw
For shoppers comparing band saws for resawing, the WEN BA1487 offers substantial capacity in a stand-mounted design. Its 9.5-amp motor handles cuts up to 8.85 inches deep and 13-3/8 inches wide, while two speed settings support different cutting needs.
Best For: Woodworkers who want a high-capacity band saw with a stand, work light, and adjustable operating speeds.
Pros:
- 8.85-inch cutting depth and 13-3/8-inch cutting width provide useful resawing capacity.
- Two speeds—1,480 and 3,280 FPM—add flexibility for different materials and tasks.
- Includes a fence, miter gauge, blade tension gauge, work light, and 3-in-1 dust port.
Cons:
- At 138.9 pounds, it is a substantial machine to position.
- The included blade is only 1/2 inch wide, so users may want additional blades for specialized resawing.
The BA1487 is a capable choice when cutting capacity and included accessories matter more than compactness. Its beveling table and broad blade compatibility make it adaptable for a range of workshop projects.
Premium Precision Pick – Powermatic PWBS-14CS 14-Inch Bandsaw
Among band saws for resawing, the Powermatic PWBS-14CS stands out for its precision-focused features and included 6-inch riser block. Its micro-adjustable blade guides, cast iron wheels, and 4-inch resaw fence attachment are designed to support controlled, consistent cuts.
Best For: Serious woodworkers who prioritize blade control, smooth travel, and a precision rip-fence setup.
Pros:
- Includes a 6-inch riser block and 4-inch resaw attachment for expanded cutting capability.
- Micro-adjustable dual-bearing blade guides above and below the table help limit friction.
- Quick-tension lever, detension setting, chip blower, and adjustable lamp improve daily usability.
- Precision-balanced cast iron wheels are designed to reduce vibration.
Cons:
- At 178 pounds, it is heavier than the other listed models.
- The included lamp does not include a bulb.
- Its 115/230V, 1-1/2 HP configuration may require more setup planning than a compact benchtop saw.
This Powermatic is the strongest fit for a dedicated woodworking shop seeking refined blade guidance and resaw-oriented accessories. The included riser block and fence attachment add value for taller stock, while the heavy cast iron construction is suited to stable operation.
Compact Budget Option – WEN BA3959 9-Inch Benchtop Band Saw
The WEN BA3959 is a compact entry point for shoppers seeking band saws for resawing smaller workpieces. Its 2.8-amp motor cuts up to 3-1/2 inches deep and 9 inches wide, making it better suited to light-duty projects than tall-stock resawing.
Best For: DIYers and hobbyists who need a space-saving benchtop saw for smaller wood cuts and basic workshop tasks.
Pros:
- Compact 9-inch benchtop format weighs 40 pounds for easier placement.
- Includes a rip fence, miter gauge, blade guard with ball-bearing supports, and dust port.
- Table bevels up to 45 degrees and the saw includes a two-year warranty.
Cons:
- Its 3-1/2-inch cutting depth limits large-stock resawing.
- The 2.8-amp motor is less powerful than the motors in the larger listed saws.
- It accepts blades from 1/8 to 3/8 inch wide, offering less blade-width range.
The BA3959 makes sense when compact size and basic functionality are the priorities. It can handle smaller resawing jobs, but users working with thick stock should consider a larger machine with greater cutting depth.
High-Capacity Pick – Laguna Tools 2.5HP 13-Inch Resaw Bandsaw
Laguna Tools 220v 2.5hp Bandsaw with 13" Resaw and 38" Table Height - Model mband14bx220-250, Black
Check Price On AmazonFor serious band saws for resawing work, the Laguna Tools mband14bx220-250 emphasizes power and capacity. Its 2.5hp, 220-volt motor and stated 12-inch resaw height make it suited to demanding woodworking, while the large table provides useful support for bigger stock.
Best For: Experienced woodworkers who need a powerful, full-size machine for substantial resawing projects.
Pros:
- 2.5hp motor with 220-volt corded-electric power.
- Stated 12-inch resaw height for tall stock.
- 21-1/2 x 16-inch table with 7-degree left tilt.
- Built-in brake and two-year machine warranty.
Cons:
- Requires a 220-volt power source.
- At 260 pounds, it is not easy to relocate.
- Its higher-capacity design may be more machine than occasional users need.
This is the strongest resaw-focused option in the group when capacity and motor power take priority. Confirm your electrical setup and available floor space before buying.
Compact Workshop Choice – SHOPMAX 4.2-Amp 10-Inch Benchtop Band Saw
The SHOPMAX is a practical choice among band saws for resawing when space and portability matter. Its 4.2-amp induction motor cuts up to 4.5 inches deep and 10 inches wide, while the included stand and dust-extraction connector support a compact workshop setup.
Best For: DIY woodworkers and smaller shops that need a manageable saw for moderate resawing and general cuts.
Pros:
- 4.2-amp induction motor cuts up to 4.5 inches deep.
- Worktable adjusts up to 45 degrees.
- Steel construction and ball bearings support smooth cutting.
- Includes a stand and suction connector for dust extraction.
Cons:
- Its 4.5-inch cutting depth is limited for taller resaw stock.
- Dust extractor is sold separately.
- Comes partially assembled.
With a 10-inch format and 54.7-pound weight, this SHOPMAX balances capability with easier placement than a full-size floor machine. Choose it if your projects stay within its stated cutting depth.
Versatile Two-Speed Option – VEVOR 10-Inch Two-Speed Benchtop Bandsaw
For buyers comparing band saws for resawing with broader material flexibility, the VEVOR HBS250 offers two speed settings and a stated 6-inch cutting height. Its 1/2hp motor, tilting table, work light, stand, fence, and miter gauge make it a versatile benchtop setup.
Best For: Users who want a compact, adjustable saw for wood and occasional aluminum, plastic, or other supported materials.
Pros:
- Stated maximum cutting height of 6 inches and 9.65-inch throat width.
- Two speed settings from 560 to 1100 rpm.
- Table tilts from 0 to 45 degrees.
- Includes stand, work light, fence, and miter gauge.
Cons:
- The 1/2hp motor is less powerful than the Laguna’s 2.5hp motor.
- Its 10-inch format limits capacity compared with larger resaw machines.
- The dust collector is not listed as included.
The VEVOR stands out for adjustability and included accessories rather than maximum resaw power. Its 6-inch stated cutting height gives it useful middle-ground capacity for hobby and multipurpose work.
How We Picked the Best Band Saws for Resawing
We focused on the specifications that matter most when cutting thick or wide stock: resaw capacity, motor output, wheel size, table support, blade adjustment, and overall machine format. The list includes full-size 14- and 18-inch saws for serious shop work as well as smaller benchtop models for lighter-duty projects and limited workspace.
We also considered practical ownership factors, including voltage requirements, included stands, speed settings, footprint, and whether a model is better suited to occasional use or demanding production work. Specifications can vary by configuration, so confirm the seller’s current details before purchasing.
Quick Comparison
| Best For | Recommended Type | What to Prioritize |
|---|---|---|
| Large, frequent resawing | 18-inch, 2- to 3-HP saw | High capacity, rigid frame, adequate electrical service |
| General furniture and small-shop work | 14-inch, 1.5- to 1.75-HP saw | Blade guides, table stability, reliable tracking |
| Occasional resawing | 14-inch value-oriented saw | Capacity, included stand, adjustment range |
| Limited space or smaller stock | 9- or 10-inch benchtop saw | Compact footprint, manageable blade size, realistic capacity |
Key Buying Factors for Band Saws for Resawing
Resaw Capacity and Throat
Resaw capacity is the maximum height a saw can cut beneath its upper guide. Choose more capacity than your typical board thickness so you can position the work comfortably and avoid operating at the machine’s limit. Throat depth also affects how wide a panel or board can be maneuvered around the blade.
Motor Power and Electrical Requirements
More motor power helps maintain blade speed in dense hardwoods and taller stock. A 1.5- to 1.75-HP machine is a practical middle ground for many woodworking shops, while larger 2- to 3-HP saws are better for frequent, demanding resawing. Check whether the model needs 115V, 230V, or a dedicated circuit before ordering.
Blade, Guides, and Tracking
For resawing, use a sharp, wide blade with an appropriate tooth pattern and enough set to clear the kerf. Durable guide bearings, easy adjustment, and stable wheel tracking are more valuable than headline motor ratings alone. A well-tuned saw with a suitable blade can outperform a more powerful machine that is poorly aligned.
Table, Fence, and Dust Collection
A large, rigid table supports heavy boards and reduces movement during long cuts. A tall, accurate fence is especially useful for repeatable veneer or board resawing. Dust ports and effective extraction improve visibility, cleanup, and blade performance.
Who Should Buy Which Band Saws for Resawing?
Choose an 18-inch JET or Laguna machine if you routinely resaw wide hardwood, work with large blanks, or need the stability of a full-size saw. The 14-inch JET, RIKON, Laguna, Powermatic, and WEN models are better fits for general-purpose woodworking shops that want meaningful capacity without the footprint of the largest machines.
Benchtop options from WEN, SHOPMAX, and VEVOR make sense for beginners, apartment-size workshops, and users primarily cutting thinner boards, curves, or small project parts. They are convenient and economical, but their lower capacity and lighter construction make them less suitable for sustained wide-board resawing.